Using a vacuum, cold, or hot veneer press with white or yellow glue is the preferred method for applying wood veneer. If a press is not available, good contact cement may be used. Look for contact cement with the highest level of solids and follow the adhesive manufacturer instructions.Click to see full answer. People also ask, what is the best way to apply contact cement? How to Apply Contact Cement Clean your work area thoroughly. Apply the contact cement with a disposable brush or roller. Let your bonding objects stand for 15 minutes or until they are dry. Clean the excess contact cement off your products that you’re bonding. Clean your work area and use your product again after just 15 minutes or so. Also, how do you attach veneers? Part 2 Applying the Veneer Cut your veneer to size. Cut the veneer to the size you want, making sure to leave as little overhang as possible. Apply contact cement to the substrate. Apply contact cement to the veneer. Allow for tack time. Place a sheet of wax paper. Align the veneer. Smooth out the piece. Trim the edges. In this regard, what is the best glue for wood veneer? The 3 most common ways to glue wood veneers down are: Use veneers that come with a self stick, 3M peel and stick adhesive. Use 2 coats of contact cement on both surfaces. Use woodworker’s glue, such as Titebond 2, and apply pressure with clamps. What does contact cement not stick to? DIFFERENCES BETWEEN WATER AND SOLVENT BASED CONTACT CEMENTS Water based contact does not stick well to metal or glass but solvent based does. Neither sticks well to masonry but interesting enough they will stick to each other.
