Cutting Brass Tube Using Tubing Cutter Step 1: At first, mark on the brass using a permanent marker where you want to make the cut. Step 2: Now, fasten the tool where you have marked for cutting. Step 3: Spin the cutter around the brass pipe a couple of times. The process will slowly but surely.Click to see full answer. In this way, what is the best way to cut brass?Straight cuts in brass sheet can also be made with a hacksaw. Place the brass between two sheets of scrap plywood and clamp all three pieces in a vise. The wood supports the metal during the cut. If you need to see a marked line on the surface of the brass, place a sheet of plywood on the back side of the brass only.Secondly, can you cut brass with a scroll saw? With skip tooth blades, you can use your scroll saw to cut through virtually any kind of metal—from copper to brass, cold rolled steel, bronze, and aluminum sheet. It is, in fact, perfect for cutting soft metal up to 1/8th of an inch in thickness. One may also ask, how do you cut a brass pipe? How to Cut Brass Pipe Use a tape measure to measure the length of brass pipe needed and mark the cut line with a marking pen. Secure the length of brass pipe in a friction clamp and tighten until it holds the pipe firmly. Open the tubing cutter to allow the cutting blade and rollers to clear the perimeter of the pipe. Is brass easy to cut? Cutting Brass Using a Circular Saw A handheld circular saw can be very handy for cutting brass as it can cut various other metals. You just need a sharp blade on your circular saw and get a vise to hold the material you want to cut.