Glaze STEPS: Clean cabinets very well and remove hardware. If you purchased the clear glaze in order to custom mix your own color do that first. Apply the glaze with a sponge brush. Paint the glaze on a few cabinet doors or drawers at a time. Go back with a damp (NOT wet) cloth and remove all of the excess glaze. Click to see full answer. In this way, how do you paint old white cabinets with glaze? Clean Cabinets. Put on a pair of rubber gloves and wipe cabinet faces with a damp rag to remove surface dirt. Sand Edges. Using a sanding block wrapped in 80-grit sandpaper, sand raised edges and corners of each cabinet door and/or opening. Apply Antiquing Glaze. Smooth Finish. Darken Edges. Remove Excess Glaze. Additionally, how do you make paint look distressed? Prepare Your Space. Start by laying down drop cloths and preparing the area. Sand and Clean the Piece. Sand the surface of the piece. Paint the Piece. Apply Wax and Top Layer of Paint (Optional) Distress the Piece with Sandpaper and Steel Wool. Apply a Stain (Optional) Protect the Finished Piece with Polyurethane. Beside above, how do you glaze over latex paint? Instructions Glazing works best on semi-gloss or low-luster acrylic or latex paint surfaces. Apply the glaze with a brush, roller or rag. Once you have the glaze rolled or brushed on, you have roughly 20 minutes to work that area. How much does it cost to paint and glaze kitchen cabinets?Glazing costs $10 to $25 per square foot or $1,500 to $3,500 for a professional installation in the average 150 square foot kitchen. It’s a great DIY finishing project that can save you $700 to $1,500 in labor. Glaze is typically a semi-transparent coating that gives your painted wood an antiqued look.