How do you paint hurricane shutters?

Steps Use a screwdriver to remove the shutters from the house. Stand a shutter in a large mixing tub, and clean thoroughly with soapy water and a scrub brush. While the shutter is still in the bucket, wet sand loose paint from both sides with a sanding sponge. Hose down the shutter, and set aside to dry. Click to see full answer. Likewise, people ask, what kind of paint do you use on shutters?When painting plastic or vinyl, use a high quality, exterior, acrylic latex paint or a paint made specifically for plastic. While not required, priming the shutters with a latex primer before painting with acrylic latex paint can increase adhesion and allow better coverage by the top coat.Beside above, how do you prepare plastic shutters for painting? Spray Paint Project Steps Using an all purpose cleaner/degreaser, wipe down shutters to remove all dirt and grime. (If the plastic is new, wipe down with paint thinner for best results.) Rinse thoroughly with water and allow to dry. Using painter’s tape, completely tape off any area that you do not want painted. Also asked, how do you paint shutters with a brush? Paint the louvers first with a 1/2- or 1-inch trim brush. Then paint the frame with a 2-inch brush. Leave the shutter edges until last so you can periodically turn the shutter over to check for runs. If you find any, smooth them out with an almost-dry brush before they set.Can you paint shutters while still on the house?You can paint your shutters while they’re attached to the house if you mask off the adjoining wall and window, but it’s best to remove them so they can be properly cleaned, sanded and painted on all sides.

Leave a Reply

Your email address will not be published. Required fields are marked *