A 3-wire, 240-volt circuit has two hot wires—each supplying 120 volts for a total of 240—and an equipment ground wire. A 120-volt circuit has only one hot wire connected to the breaker plus a neutral wire connected to the neutral bus bar in the service panel.Click to see full answer. Herein, what wire do I use for 240 volts? Two-wire and Three-wire Cables A 240 volts hookup is usually provided through a two-wire cable such as 12/2, 10/2, or 8/2 or three-wire cable such as 12/3, 10/3, or 8/3, the last digit being the number of wires in the cable excluding the ground wire.Also, what is the difference between 220 and 240 volts? As such, you’ll find most of them have 220 volts instead of 240 while others have the vice versa. Most domestic appliances are rated 220 volts and below. This means that they can run on either 220 or 240 volts. However, plugging a 240 volt kiln, for example, into a 220 volts circuit will result in slow firings. Accordingly, does a 240 volt circuit need a neutral? The green wire, or bare copper wire, is the ground, which is there for electrical safety. 240 volt wiring, on the other hand, may not need a neutral white wire. Instead there is an additional hot wire which is usually red or blue in color. The two hot wires complete the circuit.Is a double pole 20 amp breaker 40 amps?There are two types of standard breakers: single-pole and double-pole. Single-pole breakers are rated for 120 volts and 15 or 20 amps. Double-pole breakers, on the other hand, are typically rated for 20 to 60 amps and supply 240-volt power to large appliances, like electric dryers and ranges.